[Pw_forum] version.f90 not found durin installation of qe-6.2

[José C. Conesa]

Dear Paolo,

Well.. indeed I have verified now that file version.f90 is included 
where you say. The point is that after running ./configure the file 
disappears; one does not expect that configure would do such thing.

The remedy is to do, _befor__e r__unning ./configure_, as said in the 
link you mentioned in you first reply. Which obviously I had not 
interpreted well. I had looked not in the tarball but in the result of 
untarring it. I presume that you will modify Modules/Makefile as needed 
one of these days.

But now another problem appears: when compiling Modules/qes_libs.f90 
this error appearsmany times:

  error #6457: This derived type name has not been declared.   [XMLF_T]
    TYPE(xmlf_t)  :: xp

and compilation aborts. What to do?

In any case, if the tarball is -rc maybe I cannot rely on its results...

Best,
José Carlos
El 05/10/2017 a las 19:01, Paolo Giannozzi escribió:
> On Thu, Oct 5, 2017 at 4:05 PM, José Carlos Conesa 
> <jcconesa at icp.csic.es <mailto:jcconesa at icp.csic.es>> wrote:
>
>     I do not understand what you mean by "unlikely"; this qe-6.2
>     version is available in the normal qe download page. Maybe the -rc
>     suffix means pre-release; I did not know it.
>
>
> "rc" = "release candidate" in the jargon of geeks. Note that the 
> release hasn't been announced yet. Of course everybody is welcome to 
> test it and to report problems.
>
>     I could not find any file named version.f90 in the tarball
>
>
> I could:
> $ tar -tzvf qe-6.2.tar.gz qe-6.2/Modules/version.f90
> -rw-r--r-- giannozz/giannozz 510 2017-09-26 15:35 
> qe-6.2/Modules/version.f90
> The file version.f90 is attached
>
> Paolo
>
>     , and what should one do otherwise with Modules/Makefile is unclear.
>     Please tell if one should refrain from using that version while it
>     has the -rc suffix.
>     Regards,
>     José Carlos
>     El 05/10/2017 a las 13:58, Paolo Giannozzi escribió:
>>     On Thu, Oct 5, 2017 at 1:43 PM, José Carlos Conesa
>>     <jcconesa at icp.csic.es <mailto:jcconesa at icp.csic.es>> wrote:
>>
>>         I have downloaded qe 6.2
>>
>>
>>     unlikely: what is available is a pre-release, for testing
>>
>>         Compilation starts [...] then aborts with the
>>         message that version.f90 cannot be found.
>>
>>
>>     see here:
>>     http://qe-forge.org/pipermail/pw_forum/2017-September/113895.html
>>     <http://qe-forge.org/pipermail/pw_forum/2017-September/113895.html>
>>
>>     Paolo
>>
>>     -- 
>>     Paolo Giannozzi, Dip. Scienze Matematiche Informatiche e Fisiche,
>>     Univ. Udine, via delle Scienze 208, 33100 Udine, Italy
>>     Phone +39-0432-558216 <tel:+39%200432%20558216>, fax
>>     +39-0432-558222 <tel:+39%200432%20558222>
>>
>>
>>
>>     _______________________________________________
>>     Pw_forum mailing list
>>     Pw_forum at pwscf.org <mailto:Pw_forum at pwscf.org>
>>     http://pwscf.org/mailman/listinfo/pw_forum
>>     <http://pwscf.org/mailman/listinfo/pw_forum>
>
>
>     -- 
>     José C. Conesa
>     Director
>     Instituto de Catálisis y Peroleoquímica, CSIC
>     Campus de Excelencia UAM-CSIC
>     Marie Curie 2, Cantoblanco
>     28049 Madrid, Spain
>     Tel.+34-915854766 <tel:+34%20915%2085%2047%2066>    Fax+34-915854760 <tel:+34%20915%2085%2047%2060>
>
>
>     _______________________________________________
>     Pw_forum mailing list
>     Pw_forum at pwscf.org <mailto:Pw_forum at pwscf.org>
>     http://pwscf.org/mailman/listinfo/pw_forum
>
>     -- 
>     Paolo Giannozzi, Dip. Scienze Matematiche Informatiche e Fisiche,
>     Univ. Udine, via delle Scienze 208, 33100 Udine, Italy
>     Phone +39-0432-558216, fax +39-0432-558222
>
>
>
>     <http://pwscf.org/mailman/listinfo/pw_forum>
>
> <http://pwscf.org/mailman/listinfo/pw_forum>
>
>
> _______________________________________________
> Pw_forum mailing list
> Pw_forum at pwscf.org
> http://pwscf.org/mailman/listinfo/pw_forum

-- 
José C. Conesa
Instituto de Catálisis y Petroleoquímica, CSIC
Marie Curie 2, Cantoblanco
28049 Madrid, Spain
Tel. (+34)915854766

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.quantum-espresso.org/pipermail/users/attachments/20171005/a80f9245/attachment.html>