[Pw_forum] Non Convergence

Paolo Giannozzi paolo.giannozzi at uniud.it
Thu Nov 6 18:47:01 CET 2014


On Thu, 2014-11-06 at 17:12 +0000, BARRETEAU Cyrille wrote:

> I would also advise to increase nbnd since for magnetic system 
> the default value is often too small. I usually take nbnd=nelec/2*1.5 
> instead of the default value of nelec/2*1.2
> 
> Therefore you should take at least nbnd=80 instead of 60.

the original input had a larger nbnd. I reduced it just to speed up the
calculation. I agree that it is on the lower bounds of what one can 
safely use with metals.

Paolo

> Cyrille
> --------------------------------------------------------------------------
> Cyrille Barreteau
> CEA Saclay, IRAMIS, SPEC Bat. 771
> 91191 Gif sur Yvette Cedex, FRANCE
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> DTU Nanotech
> Ørsteds Plads, building 345E
> DK-2800 Kgs. Lyngby,  DENMARK
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +33 1 69 08 29 51 / +33  6 47 53 66 52  (mobile)   (Fr)
> +45    45 25 63 12/  +45     28 72 55 18  (mobile)  (Dk)
> email:     cyrille.barreteau at cea.fr  /  cyrbar at nanotech.dtu.dk
> Web:     http://iramis.cea.fr/Pisp/cyrille.barreteau/
>  -------------------------------------------------------------------------------
> 
> ________________________________________
> De : pw_forum-bounces at pwscf.org [pw_forum-bounces at pwscf.org] de la part de Paolo Giannozzi [paolo.giannozzi at uniud.it]
> Envoyé : jeudi 6 novembre 2014 17:45
> À : PWSCF Forum
> Objet : Re: [Pw_forum] Non Convergence
> 
> Metallic slabs are sometimes difficult to converge.
> I tried with mixing_mod='local-TF' (works better for slabs),
> a smaller mixing_beta (0.1), a larger degauss (0.05) and a
> denser k-point grid (8 8 1) that should yield smoother results,
> and it converges, at least for the reduced cutoff (30/300)
> I tried.
> 
> Paolo
> 
> 
> Try
> On Wed, 2014-11-05 at 15:41 +0000, Elliot Menkah wrote:
> > Hello Everyone,
> > I'm running a geometry optimization calculation(relax) of an 11-layer
> > Nickel slab and I used the deafult nstep (nstep=50) and electron_maxstep
> > (100).
> >
> > My system did not converge with the parameters and configurations set as
> > it run through 100 iterations.
> >
> > Could there be something wrong with the configuration or would I have to
> > increase the  electron_maxstep value?.
> >
> > Please find attached both input and out files in that regard.
> >
> > Thank you
> >
> >
> > Kind Regards,
> >
> > Elliot
> >
> >
> >
> >
> > _______________________________________________
> > Pw_forum mailing list
> > Pw_forum at pwscf.org
> > http://pwscf.org/mailman/listinfo/pw_forum
> 
> --
>  Paolo Giannozzi, Dept. Chemistry&Physics&Environment,
>  Univ. Udine, via delle Scienze 208, 33100 Udine, Italy
>  Phone +39-0432-558216, fax +39-0432-558222
> 
> _______________________________________________
> Pw_forum mailing list
> Pw_forum at pwscf.org
> http://pwscf.org/mailman/listinfo/pw_forum

-- 
 Paolo Giannozzi, Dept. Chemistry&Physics&Environment, 
 Univ. Udine, via delle Scienze 208, 33100 Udine, Italy
 Phone +39-0432-558216, fax +39-0432-558222 




More information about the users mailing list